KEN IWD 2314

Also suitable for autoclave baskets

Extra-spacious machine with limited outer measurements

KEN IWD 2314 is identical with IWD 2311, but with its extra 4 cm of depth it is also possible to wash and disinfect autoclave baskets and instrument containers at, for example, sterile centres. The machine is available both as a pass-through machine and with one door. The pass-through model ensures effective separation of an unclean and clean side, thus optimising the level of hygiene and reducing the risk of hospital infections. The machine is elegant and clean-lined Danish design.

KEN IWD 2314 can wash at up to 4 levels and, with its extra 4 cm of depth and large range of flexible equipment, it is a good choice for disinfecting washes at e.g. surgical wards, clinics for out-patients and sterile centres.

Advantages

  • User-friendly control panel ensures correct operation
  • Programme information etc. is shown in the display in plain language
  • Individual programme selection possible. Four programme positions are standard
  • Process Indication Bar shows how far the programme has come
  • Double monitoring of temperature
    (EN/ISO 15883)
  • Possible selection of intelligent, maintenance-free drying module
  • Possible connection of up to 4 types of chemicals - 2 as standard
  • Able to have printer connected for optimum process documentation
  • Lockable lower compartment for keeping chemicals - up to 4 x 5 l containers
  • Thermo glassdoor as standard

Find out more

Specifications

Power connection (standard) 3 x 400 V,N,J, 50Hz
Connected load/initial fuse 10kW/16A
Water connection Cold untreated water: 1 pcs., ¾” RG, 5-30 gr.C, 0-30 gr.dH
Water connection Hot soft water: 1 pcs., ¾” RG, 30-70 gr.C, 0-3 gr.dH
Water connection Demin. water: (Extra) 1 pcs., ¾” RG 5-70 gr.C
Water pressure 200-800 kPa
Outlet valve Ø 50
Amount of water (approx.) per intake 13-14 l
Ventilation (if supplied with drying module) Ø 70, 100 m3/time
Drying module HEPA filter class S, 5000 - 6000 hours life cycle
Washing arms Washing arms are detachable and can be disassembled for cleaning
Pump capacity 370 l/min.
Free depth 2 doors 620 mm
Free depth 1 door 630 mm
Free width without central level 510 mm
Noise level approx. 59-64 dBa (sound pressure)
Sealing class IP 21 (not scavenging-proof)
Steel Quality Stainless steel quality AISI 316

Service

The machine has built-in KEN Quality control for optimum reliability. It demands a quality assurance check every 24 hours as well as servicing after 2,500 washes. The construction is service-friendly, with easy access to all components. All KEN machines conform to present EU Directives, and all hospital machines have been constructed on the basis of EN ISO 15883, including, for example, the testing of its cleaning capacity according to SIS-TR 3:2001 (formerly SPRI).
You can also read bout KEN´s Internet-based Quality assurance concept at www.kvalitetssikring.net.
In addition, KEN offers subsequent Hospital service on tel. +45 70 10 20 92:

  • Preventive maintencance
  • Service subscription or Total Service
  • Quick emergency service in the event of shutdown

Accessories

Below are examples of accessories/equipment for this machine. Look for equipment with the aid of the equipment selector below, or contact KEN for information about further possible equipment, including customised special solutions.

Item no.: 8300153
Standard basket for internal rinse and wash
Item no.: 8300161
Wire basket in stainless steel without separation
Item no.: 8300274
Universal connector with spring

Contact a KEN specialist

KEN will gladly help you find the right solution,

Planning and installation

Make use of KEN´s expertise. We will gladly advise you about overall planning.

Training

Get the maximum possible out of your investment. Take part in KEN´s course activities.